I wanted a narrower lower handlebar for my SR500. This one is economical, fits great and the chrome is top quality. I will be considering the Hurricane brand from now on when shopping for handlebars.
View Detail
32,969.52 KRW (3,520 엔)
Webike Point: +35 pt
(327.82 KRW)
배송정보
Temporarily out of stock.
Arrival date at our warehouse: 약 8 개월 반
FITMENT
HONDA
-
HORNET250
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
APE 50
08-12 (drum brake) *Processing of switch holes is required
-
APE 50
-07|08 (Carburetor) *Processing of switch hole is required only for APE100 (09-)
-
APE 100
-12 (drum brake)*APE100 (09-) requires drilling of switch holes.
전체보기
HONDA
YAMAHA
-
SR500
88-00 (CV cab models) *Processing of switch hole required
-
SR400
88-00 (CV cab models) *Processing of switch hole required
-
SR400
01-12 (Carburetor/FI disc brake models) *Processing of switch hole required
-
XJR400R
01-07 (RH02J)*Processing of switch hole drilling required|*Side cap required (for inner diameter 18mm)
전체보기
YAMAHA
SUZUKI
-
GRASS TRACKER Big Boy
09-12 (FI car)*You can use stock side caps.
-
GRASS TRACKER Big Boy
-08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
-
GRASS TRACKER
09-12 (FI car)*You can use stock side caps.
-
GRASS TRACKER
-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
전체보기
SUZUKI
KAWASAKI
-
ZRX1200R
*Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
-
ZRX1100II
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
ZRX1100
*Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
-
W800
*Need to drill a switch hole
전체보기
KAWASAKI
Others
Open Fit Model Information Table
-
Universal
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
핸들 칼라:크롬 도금
[운전대 사양]
핸들:철제 블랙/바깥 φ 22.2mm/안지름 φ 18mm
케이블, 호스류는 정상적인 채로 설치 가능
[핸들 크기]
전체 높이:80mm
전폭:680mm
홀더 장착부의 유효 폭:125mm
풀백 사이즈:155mm
내 입 각도:28번
앞으로 기운 각도:65번
*
*사진 중 핸들 클램프 (홀더 또는 포스트) 등은 상품에 포함되지 않습니다.
*사이즈 표기는 수평 때의 것입니다.
*차 검증에 기재된 차체 크기에서 높이±40mm폭±20mm를 넘는 변경이 있는 경우는 구조 변경의 신청이 필요합니다..
케이블 등 옵션 부분 목록은 이쪽
멍키 손잡이 고리는 이쪽
다른 염색은 이쪽
7/8인치 로드 모델의 노멀 핸들 크기 목록
7/8인치 스쿠터/아메리칸 모델의 노멀 핸들 크기 목록
1인치 아메리칸 모델의 노멀 핸들 크기 목록.
일본산. 시작, 장착 확인, 양산, 일관하고 자사에서 관리 히가시오사카에서 오래 기른 기술과 노하우로 소재의 엄선, 몇가지의 연마, 품번의 각인, 고 정밀의 휨 가공, 용접, 고품질인 표면 처리 등 많은 고집이 막힌 핸들 바입니다. 인장 강도에 뛰어난 STKM13A스틸 재료를 사용. JMCA안전 기준치 클리어. 피막이 두꺼운 내구성, 내식성이 뛰어난 트리플 니켈·크롬 도금 (니켈 3층+크롬층) 다듬질.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
MODEL PAGE LINKS
HONDA
- APE50
- APE50
- MONKEY
- MONKEY
- APE100
- FTR223
- FTR223
- VTR250 (MC33)
- VTR250 (MC33)
- HORNET250 (CB250F)
- CB400SS
- CB400SF (Super Four)
- CB400SF (Super Four)
- CB400SF (Super Four)
- CB400SF (Super Four)
- CB400SF (Super Four)
- CB400SB (Super Bol D'or)
- NC700S
- NC700X
- CB750
- CB1100
- CB1300SF (Super Four)
- CB1300SB (Super Bol D'or, CB1300S)
- CB1300SB (Super Bol D'or, CB1300S)
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Fits:SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps., SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo., SUZUKI GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
Fits:SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps., SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo., SUZUKI GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
Apr 15, 2020
I think I failed to use it on the W800
I've been using the EZ-FIT-Bar, but I just need a little more height! And greedy
I purchased this product
The quality is good with no plating irregularities and no surface scratches
400ccClass for Replacement compatible Pipe Handlebar I think the width is just right for the
However, this width seems to be narrow when it is W800 used this time, and it becomes a tight position around the shoulder
I ended up having to go back to the EZ-FIT-Bar I bought last time
Well, it's a MotorcycleParts-esque story
As for the products themselves, they manufacture and sell a wide variety of Pipe Handlebar It's only HURRICANE
Very good product quality and I would recommend it to anyone
That's why I was a little disappointed (Lol)
Helpful?
Fits:SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps., SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo., SUZUKI GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
Apr 17, 2017
Shape Material is both good feeling. I will try HURRICANE next time.
ZEPHYR750 (2001 type) I bought it because the OEMHandlebar was a little crooked.
The Handlebar I bought this time is a nice feeling, but there may be shapes to fit more.
Since this Manufacturer is rich in variety, I plan to exchange Handlebar several times and search for Best position while getting on in the future.
Helpful?
Fits:HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID), HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable., HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)
Installed on: YAMAHA MT-25
May 27, 2024
Hurricane HB0041B-01. Hurricane HB0349B. DAYTONA 97462
Item ordered on 24th. Mailed on 25th. Reached Singapore on 27th. Japan efficiency . Itwm bubble wrapped and boxed. No damages .
View Detail
Helpful?
Fits:HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID), HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable., HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)
Nov 9, 2018
HURRICANE BM Continental 3 Type Φ7/8-inches Handlebar Steel
Been using this handlebar for a few months and it is much better than my previous wide handlebar. The sweep back angle and height brings the handlebar closer to my body and easier for maneuvering. The shorter length from end to end and the sweep back angle towards me makes it alot more easier for lane splitting. All in all better posture and handling for urban riding.
View DetailHelpful?
New Custom Articles
