Fork was pushed out to the limit, Rear was shortened to the limit at the ride height adjustment section, and even with -20mmSeat of db’s, it was quite Limit for 149cm to ride, but LINK was also Quantity at the lowest state.:Set and it gave me a little more room, so if you're worried about footing, I'd recommend it!
However, if you lower it that far, the Side Stand will be too long and the Motorcycle will stand upright, so the recommendation is to use a STANDCut or ZETA aluminum side stand with a -15mm tip!
- Instock
190,587.38 KRW (20,337 엔) 217,417.87 KRW Save 12%
Webike Point: +203 pt
(1,902.4 KRW)
배송정보
In Stock (제조업체 창고 보관), Ships around 24th Jul. 2025
Estimated arrival date around
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
칼라:블루
소재:7000계 알루미늄 합금
조정:로 다운 (소프트) 5단계, 스탠더드, 하이 리프트 (하드) 1단계 모두 7단계
**더스트 씰은 부속하지 않습니다. 정품을 유용하거나 별도 준비 주세요.
*순정 스탠드 사용 가능
*링크비가 바뀌기 때문에, 서스펜션이 부드러워집니다..
* 이미지는 참조용입니다. 이미지는 실제 상품과 다를수 있습니다.
아탓치멩토의 위치를 회전시켜서 링크 로드의 축간 거리를 변경하는 것으로 시트액의 조정이 가능하다.
링크 재료비도 바뀌기 때문, 코스 컨디션에 맞추어 리어 서스펜션의 동작도 조절할 수 있다.
로 다운 (소프트) 5단계, 스탠더드, 하이 리프트 (하드) 1단계의 합 7단계를 설정.
베어링, 더스트 씰은 장착된 상태고, 순정 링크 로드와 교환할 만한 볼트 온 설계.
소재에 7000계 알루미늄 합금을 사용하는 높은 정밀도 절삭 가공한 후, 컬러 알루마이트 처리를 베풀다
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Fits:YAMAHA WR250R 07-17, YAMAHA WR250X 07-17, YAMAHA WR250R 07-17
Mar 30, 2022
Helpful?
Fits:YAMAHA WR250R 07-17, YAMAHA WR250X 07-17, YAMAHA WR250R 07-17
Mar 11, 2018
I bought it to improve the feet arrival of wr 250r.
In the past, I exchanged Spring back and forth, the car height at the time of riding fell down pretty, it did not splash softly, but still, I can not slip ass every time when stopping, sometimes it can run out of bad feet of getting on the descent I tried purchasing a product.
I thought it was good to make it as adjustment type because it gets softer than I thought would actually be installed.
When this is installed, the Side Stand is too long, either shortening or needing to replace the Side Stand for X.
Helpful?
Fits:HONDA CRF450R 17-20, HONDA CRF250R 18-21, HONDA CRF450RX 17-20, HONDA CRF250RX 19-21, HONDA CRF450L 19-20
Jun 30, 2019
It was exactly what I expected
The design is good and the product is as expected? (^-^) /?
I recommend it to everyone
I bought it to improve its footprint, and I'm sure it will achieve its purpose and give you peace of mind from now on You can drive
Helpful?
Fits:HONDA CRF450R 17-20, HONDA CRF250R 18-21, HONDA CRF450RX 17-20, HONDA CRF250RX 19-21, HONDA CRF450L 19-20
Jun 9, 2019
I bought them to improve my footing and I'm happy with the Potential as I expected
Before, he was seated in Seat with his feet in a very splayed out position, but his feet are just his toes
It's on the ground, so you can enjoy driving in peace? (^-^) /?
Helpful?
Fits:HONDA CRF250RALLY LD 17-20, HONDA CRF250L LD 17-20, HONDA CRF250L 13-20
Sep 30, 2018
If fine adjustment within 25 mm is necessary
I installed it on the CRF 250 M of MD 44, but Adjuster should be fixed with Tape etc. at the time of installation. When I tightened with Torque44Nm prescribed without noticing that I misaligned at the time of tightening, how swollens are !! (It is as shown in the picture) I broke the protrusions on the body side and broke the 20,000 LINK to par, but I could install it again. I thought using it, I wanted to lower the adjustment by 10 mm more, I was more rough and I did not need fine adjustment within 25 mm. If fine adjustment is unnecessary 5000 yen cheap Adjustment of Zeta None VERSION is good? But it is cool so it was good.
View DetailHelpful?
New Custom Articles
